Volkswagen VW Golf MK3 trim of steering wheel repair - image

Files (5)

vairo_apdaila_v5.stl

STL

45.6 KB

vairo_apdailav2.stl

STL

205.2 KB

vairo_apdaila_v4.stl

STL

45.7 KB

vairo_apdaila_v3.stl

STL

41.7 KB

vairo_apdaila.stl

STL

238.9 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

5 model files

Recommended kit

50g

Based on 90% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 90%	100% solid	Recommendation
vairo_apdaila_v5.stl	Printable file	45.6 KB STL	4g $0.09	8g $0.19	9g $0.21	Print with a high infill percentage for strength and durability.
vairo_apdailav2.stl	Printable file	205.2 KB STL	6g $0.14	13g $0.30	14g $0.33	Print with a high infill percentage for strength and durability.
vairo_apdaila_v4.stl	Printable file	45.7 KB STL	4g $0.09	8g $0.19	9g $0.21	Print with a high infill percentage for strength and durability.
vairo_apdaila_v3.stl	Printable file	41.7 KB STL	4g $0.09	8g $0.19	9g $0.21	Print with a high infill percentage for strength and durability.
vairo_apdaila.stl	Printable file	238.9 KB STL	6g $0.14	13g $0.32	14g $0.34	Print with a high infill percentage for strength and durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Volkswagen VW Golf MK3 trim of steering wheel repair

21 downloads1.8K views0 likes

Need this part printed?

Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.

Request print / quote

Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.

Shared by

Michael Chen

Verified

Description

This is probably a problem in all golf 3. I printed petg, bcs i don't like print with abs. 100% infil. 2024-10 Update. V3 is only longer, V4 and V5 I made it more convenient to print at an angle without support. Inclined at 30 degrees.