Files (1)

lock_grommet.stl

STL

93.9 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

15g

Based on 35% main infill across listed model files

Material cost

$0.36

Filament only at roughly $24/kg PETG / ASA

Print time

26m–43m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 35%	100% solid	Recommendation
lock_grommet.stl	Primary model	93.9 KB STL	12g $0.29	15g $0.36	29g $0.69	Ensure proper fitment by checking dimensions against the original part

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

lock grommet for BMW vehicles

1 downloads135 views0 likes

Shared by

Alfred

Verified

Description

Replacement lock grommet for lock shaft in BMW sedan. Catalog note: lock grommet for BMW vehicles is a 3D-printable car-part listing indexed for classified fitment BMW. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.

Compatible Cars

BMW (all models)

Published Jul 1, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Ellen Storpleton (lemonhope) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.