Files (2)

elise_kulisse.stl

STL

62.6 KB

Elise_Kulisse_Einsatz.stl

STL

32.6 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

12g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.28

Filament only at roughly $24/kg PETG / ASA

Print time

20m–33m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
elise_kulisse.stl	Printable file	62.6 KB STL	11g $0.26	12g $0.28	26g $0.61	Ensure proper orientation in the slicer for optimal printing
Elise_Kulisse_Einsatz.stl	Printable file	32.6 KB STL	9g $0.22	10g $0.24	22g $0.52	Ensure proper orientation in the slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Lotus Elise MK2 Shitfting Gate

2 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This thing was made with Tinkercad and printed with Anycubic i3 Mega. Designed to replace the original Shift Cover. One of the fastening Pins ist placed off-center to fit in my car. Don't know if this fits to any Elise, maybe you have to adapt it.