Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Low Profile Cover for MHD OBDII Flash Adapter - Orange (E90, E92, E9x)

0 downloads62 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a low profile cap for the MHD orange flasher intended for use with N54-powered E9x BMW 3-series. The cap is small enough to allow the kick panel cover to be installed while the MHD adapter is inserted into the OBDII slot. There are two holes which permit the LEDs to be seen while the cap is installed for diagnostic purposes, and the orientation can be determined due to an increased filet on the right side (following the shape of the OBDII port and curve of the klick panel). There are a few people selling similar items online - this is specifically a non-commercial design, meaning that if you print it, you cannot sell it. Please use shapeways or contact Sales@SpeedEast.com to have one of these printed for you.