Files (1)

OBD_Abdeckung_BMW_e90_v3.0.stl

STL

96.6 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

13g

Based on 25% main infill across listed model files

Material cost

$0.32

Filament only at roughly $24/kg PETG / ASA

Print time

22m–37m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
OBD_Abdeckung_BMW_e90_v3.0.stl	Primary model	96.6 KB STL	12g $0.29	13g $0.32	29g $0.69	Ensure a clean and dry print bed for optimal adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

OBD2-Cover for BMW e90/e91

0 downloads66 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

OBD2-Cover for BMW e90/e91. Catalog note: OBD2-Cover for BMW e90/e91 is a 3D-printable car-part listing indexed for classified fitment BMW 3 Series. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.