Lower LCD brackets for Dodge Charger 8.4" screen - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 35%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Lower LCD brackets for Dodge Charger 8.4" screen

0 downloads32 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I made this to mount the early 8.4" screen (2011 -2014) to a 2015 or later cluster bezel. I used M3 screws and nuts, though its been awhile so I don't remember the length. I printed this using petg and 100% infill. I changed the design a bit from the picture to make it a bit more sturdy. Slight variations in mounting the bracket to the cluster bezel may put the top holes in the wrong positions so I left the top bracket solid. You will need to drill the holes to mount the brackets to the lcd.