M50 Intake Manifold Swap Plug for BMW vehicles - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

M50 Intake Manifold Swap Plug for BMW vehicles

0 downloads33 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

For all those looking to swap an M50 intake manifold onto their M52, don't buy those expensive swap kits! Simply unscrew the ports out of your M52 manifold modify your M50 manifold to accept the new part. You will need to plug the 29mm hole and accommodate for the tapered insert, as well as the two tabs on either outer edge. I have created this for you to epoxy in place (or buy an expanding plug.

Compatible Cars

BMW (all models)

Published Jun 29, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Rob Stu (RobbS) · License: CC BY-NC-ND

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

3.1K

License: CC BY

View & download STL files