Magnetic phone holder for Nissan X-Trail T30 - image

Files (3)

base.stl

STL

68.2 KB

clip.stl

STL

12.4 KB

frame.stl

STL

579.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
base.stl	Printable file	68.2 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
clip.stl	Clip	12.4 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
frame.stl	Printable file	579.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Magnetic phone holder for Nissan X-Trail T30

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Magnetic holder with fastening on the front airflow grille. Assembled on the basis of the "Hoco Lotto" holder from aliexpress. Magnets, a metal plate and a rubber pad were used from it. If necessary, the model can be easily redone in such a way that the elastic band is not needed, fitting it to the existing magnets. I'm attaching the Fusion 360 source. Printed from ABS. I glued the halves together with acetone, then sanded and polished. Магнитный держатель телефона с креплением на решетку фронтального обдува. Собран на основе держателя Hoco Lotto с али, из которого были позаимствованы магниты, металлическая пластина и резиновая накладка. При желании рамку несложно переделать таким образом, чтобы резинка не понадобилась и собрать из любых имеющихся магнитов. Исходник Fusion 360 прилагается. Печатал из АБСа. Половинки склеил между собой ацетоном, стянув на время высыхания струбциной. После чего немного зашкурил и подполировал.

Compatible Cars

Nissan X-Trail

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by (wu5) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.