Nissan T32 (X-Trail, Rogue) phone holder - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Nissan T32 (X-Trail, Rogue) phone holder

0 downloads46 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Nissan T32 (X-Trail, Rogue) phone holder placed instead of the Shift Lock cover. Inside size of the Phone Holder itself: 73mm x 12mm. I used rubber rings to ideally fit my Samsung Galaxy S10. You need also a pair of M3 bolt with nut (8mm length). I printed it with PLA but PETG would be better I think. UPD: Added improved version - ShiftLockCap3b.STL - to be fixed with a cable tie (Inside size of the Phone Holder itself: 72.6mm x 9.8mm, printed without support).

Compatible Cars

Nissan X-Trail

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by vlad ua (vladua) · License: CC BY-NC-ND

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.