Mazda 2 DE 2008 USB, AUX Bracket - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Mazda 2 DE 2008 USB, AUX Bracket

0 downloads34 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a mod for my Mazda 2 DE 2008. I made this "bracket" to fit in the place of the original AUX (part number: D655 66 DFX-5708 70718A) port. This is useful for Android Auto / Apple Carplay aftermarket radio swaps to make it look neat and factory. Parts needed: -Radio Frame for your Mazda 2 DE -USB Female End (again I can’t guarantee that yours will fit (I have included a picture of my measurements)) -Aftermarket radio. After printing it might be necessary to trim and sand a little to make it fit. I can’t guarantee that your Female USB port will fit in this design, so I have included the part files for Autodesk inventor. (Excuse the very messy cadding, I’m very new to 3D designing.) I hand measured everything with a digital calliper, so it might not be totally accurate.