Files (2)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| miata-ayna-cita-V1.stl | Printable file | 2.6 MB STL | 42g $1.02 | 46g $1.10 | 101g $2.42 | Ensure proper orientation in the slicer for optimal support generation. |
| miata-su-depo-kapak.stl | Printable file | 1.7 MB STL | 35g $0.85 | 39g $0.92 | 84g $2.03 | Ensure proper orientation in the slicer for optimal support generation. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
MAZDA MIATA MX5 WATER TANK COVER AND MIRROR SLAT
Shared by
3DPrintedCarPartDescription
In order to produce the Mazda Miata MX5 water tank cap and mirror moldings, the original mirror strip had to be transferred to the computer. For this, with the measurements we have made with the caliper, we have detailed the bar as left and right, as well as the water tank cover in detail and as stl. After pressing the G-codes (with Cura) BeamUP3D S, which we prepared to print the mirror laths with black Copolyester and the water tank cover with Flex filament, we cleaned the supports on the laths and installed them in the vehicle. We used the slats in the vehicle without any surface treatment.
Compatible Cars
Originally published on thingiverse.com by cahit ogün onat (coonat) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
