Rearview Mirror GoPro Dashcam Mount - image

Files (1)

gopro_miata_nd_mirror_mount_2.stl

STL

129.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
gopro_miata_nd_mirror_mount_2.stl	Mount / bracket	129.4 KB STL	Slice file	Slice file	Slice file	Print with the circular clamp flat on the build plate

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mirror Covers

Rearview Mirror GoPro Dashcam Mount

0 downloads45 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a GoPro mount for my 2019 Mazda Miata ND GT and also works for my Hyundai Kona. The circular clamp dimensions should fit exactly the rearview mirror with autodimming and homelink. It is angled to avoid the power connector behind the mirror. It may work for other cars also. The radius of the circular clamp around the mirror is 11.25mm. It is best to use it with an adapter which can swivel the camera so it is in the correct orientation on the bottom. Printed with supports for parts which touch the build plate. Print with the circle flat. The little latch should print in place and come lose with a little bit of force. I used just 5% for support material. After printing, I spray painted the part black and eventually used M5 bolts instead of the GoPro bolt to be more discreet.