Mazda MX5 Miata Cup Holder System preview

Files (1)

cup-Holder-bracket-v2.stl

STL

71.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 60%	100% solid	Recommendation
cup-Holder-bracket-v2.stl	Mount / bracket	71.8 KB STL	Slice file	Slice file	Slice file	Use existing screw holes for mounting, possibly requiring longer screws

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mazda MX5 Miata Cup Holder System

0 downloads8 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG or ASA

Print time

Slice to calculate

Filament

Slice to calculate

Supports

supports likely for attachments, verify in slicer

Infill

100% for the bracket, 50-70% for cup holders

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This is a modular Cup Holder System for the early (89-97) Mazda MX5 (NA) Miata. The bracket attaches to the side of the console near the radio/heater panel (left, right or both sides) using the existing screw holes. You may need to source a longer screw to mount it. The various accessories slide on and off so you can quickly change them to use different ones or none at all. The currently available accessories are: Small cup holder - energy drink cans (~65mm) Medium cup holder - soft drink cans (~70mm Coke can) Large cup holder - Insulated coffee mugs (~80mm) Phone/stuff and pen holder - LH and RH versions (so pen isn't near shifter) Coin holder - fits USA coins Recommend 100% infill for the bracket, a little less for cup holders. Supports should be used for the various attachments, but none are needed for the bracket. Enjoy!

Compatible Cars

Mazda MX-5

Published Jul 27, 2026Updated Jul 27, 2026

Originally published on printables.com by rreibel · License: CC BY

Browse categories

Browse other part families

Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Hyundai

3.9K

View & download STL files