← Back to Browse Parts
Files (3)
cluster_half--FINAL.stl
STL
794.0 KBcluster_half-rings--left.stl
STL
1.1 MBcluster_half-rings--right.stl
STL
1.2 MBPrint guidance estimate
Estimated from part metadata
Print cost & setup estimate
Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.
3 model files
Typical selected file
33g
Based on 25% main infill for the largest likely-needed model file
Material cost
$0.79
Filament only at roughly $24/kg PETG / ASA
Print time
56m–1.6h
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| cluster_half--FINAL.stl | Printable file | 794.0 KB STL | 25g $0.61 | 28g $0.66 | 60g $1.45 | Ensure proper orientation in the slicer to minimize supports |
| cluster_half-rings--left.stl | Choose left variant | 1.1 MB STL | 30g $0.71 | 32g $0.77 | 71g $1.70 | Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing. |
| cluster_half-rings--right.stl | Choose right variant | 1.2 MB STL | 30g $0.72 | 33g $0.79 | 72g $1.72 | Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Dashboard
Retro Gauge Cluster with Rings | NA Mazda MIATA
0 downloads88 views0 likes
Shared by
3DPrintedCarPartVerified
Description
Retro Gauge Cluster Bezel for NA Miata To give your NA miata gauge cluster a retro look, print this one out, get some lenses mentioned below and a few LED indicator housings. This design is slightly different from my original design in the way that it has rings and small tweaks to fit the lenses a little bit better. Again, more information below. ## For more designs and staying up to date: You're also welcome to go to my Github Repository for more frequent updates! I have a ton more miata designs uploaded there as opposed to here because the process to show work on here is tedious. *I didn't add a hole for the odometer pole that allows you to reset your odometer.You'll need to drill that out or remix this design*
Compatible Cars
Published Jul 1, 2026Updated Jul 15, 2026
Originally published on thingiverse.com by Bry Nguyen (bryhasamakerbot) · License: CC BY
Verified by drivers
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Loading fitment proof…
Sign in to share fitment proof, installed photos, and material notes.
Comments (0)
Part lists
Save this part to named public or private collections. Public lists can be shown on this part page.
Related Parts
Finding specific fitment/category matches first.
