Miata_Double_Gauge_Pod.STL

STL

33.5 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

10g

Based on 25% main infill across listed model files

Material cost

$0.24

Filament only at roughly $24/kg PETG / ASA

Print time

17m–28m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Miata_Double_Gauge_Pod.STL	Primary model	33.5 KB STL	9g $0.22	10g $0.24	22g $0.53	Print with the face upright as instructed to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Miata Gauge Pod

1 downloads70 views0 likes

Shared by

Verified

Description

Gauge pod that holds two standard 2" (2 1/16") gauges. Lay flat so that the face is upright.

Updated Jul 15, 2026

Originally published on thingiverse.com by Matthew Johnson (mjohnson1005) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.