Files (1)

Inlay_MX5.stl

STL

355.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Inlay_MX5.stl	Primary model	355.7 KB STL	Slice file	Slice file	Slice file	Print with the forward face down for best results

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Mazda MX5 Dashboard USB Inlay

0 downloads83 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Simple Inlay for hosting 2 USB Charging Modules of type MH-KC24. Best prints on forward face down, no supports, no raft. Printed in PLA and PETG, both came out fine. The holes in the sides are for gluegun access to glue the USB Modules in place. The module itself is a press-fit into the original MX5 Dashboard. Pictures and fit for MX5 NBFL, a.k.a. Miate MK 2,5. Dashboard fittet at least between 2001 and 2005.