Mazda washer fluid reservoir cap - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Mazda washer fluid reservoir cap

0 downloads48 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a washer fluid reservoir cap made for Mazda CX-5. After a quick google search I found out that this should be compatible with other Mazda models. I used PETG for it, but you could use ABS or other material that is resistant to heat. I don't recommend PLA(I don't think it will resist the summer heat in the engine compartment). Any constructive feedback is welcomed!