Files (1)

bardakl─▒k_ver2.STL

STL

513.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
bardakl─▒k_ver2.STL	Primary model	513.3 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Mazda2 Cupholder

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a cupholder for Mazda 2(DE) or Demio. There is empty space between gear lever and center console on Mazda2 and i've decided to use this area. It works and fits perfectly. Sanded first with 60grit and 220grit later, painted with black spray paint. But unfortunately i've miscalculated the 330cl bottle size therefore you cant put 2 330cc bottle next to each other. Other than that there is no problem. Hope it's useful to you as well.