Files (1)

mecedes.stl

STL

1.7 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 100%	100% solid	Recommendation
mecedes.stl	Primary model	1.7 MB STL	Slice file	Slice file	Slice file	Ensure the adapter is properly aligned with the car jack and vehicle

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Mercedes Benz car jack adapter

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I modified adapter from hgglmmr, because it fits my car (W246) perfectly, but it didn't fit my car jack. My car jack has bigger head so I had to modify lower part of adapter. Attached is also Sketchup file, so you can modify it if even this version doesn't fit your jack. If you are not sure and you are too lazy to measure (as me), you can print it with 5% infill, it takes just 40 minutes:) Final version has to have 100% infill thou. It took me 5,5 hours. I used it already and it is perfect. Changing tires is a bit safer as there is lower chance that your jack will slip away compared to not using adapter.