Files (1)

Part_Studio_1_-_ValveHolder.stl

STL

81.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 50%	100% solid	Recommendation
Part_Studio_1_-_ValveHolder.stl	Mount / bracket	81.9 KB STL	Slice file	Slice file	Slice file	Ensure 6 solid layers on all sides for strength

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

Mercedes Benz W123 Valve Holder

0 downloads54 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This will hold the valve from turning when you are adjusting the valves on W123 and related engines. To make it strong enough - 6 solid layers on all sides. 50% infill. PLA works fine. This was designed for just one of the valves. It may have trouble fitting on others if the fuel injectors are installed.

Compatible Cars

Mercedes-Benz Baureihe 123

Published Jun 28, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Richard Hollabaugh (RichHollabaugh) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.