Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Sprinter_Warndreier_Halter.stl | Primary model | 100.5 KB STL | Slice file | Slice file | Slice file | Ensure a strong adhesion to the print bed to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Mercedes Benz Warndreieck Halter
Shared by
3DPrintedCarPartDescription
Holder for the warning triangle of the mercedes benz sprinter 903 may fit to other models too.
Compatible Cars
Originally published on thingiverse.com by Philipp Knobloch (phikno) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Mercedes 2015400282 Cap Hand Drawn Replacement - W124, W201, W126 etc
Mercedes-Benz
License: CC BY
View & download STL files
mercedes benz 308 clips
Mercedes-Benz
License: CC BY
View & download STL files
Mercedes Vito fuel cap tether
License: CC BY-NC
View STL source
Mercedes-Benz Plastic Clamp 0009880676
Mercedes-Benz
License: CC BY
View & download STL files
MB Fuel Cap tether (Tankdeckel Halteseil)
Mercedes-Benz
License: CC BY
View & download STL files
BMW X5 E70 Center Console Blind Plate
BMW
License: CC BY
View & download STL files
