Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Mountaineer_rear_seat_switch_housing.stl | Mount / bracket | 289.1 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation to minimize supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Mercury Mountaineer rear seat switch housing
Shared by
3DPrintedCarPartDescription
Last year the switch housing for my 2008 Mountaineer broke when the load of plywood i was hauling slid and was resting on top of it. This is not a part that is easily replaced. The switches themselves are held with a wedge shaped "snap fit" design that is guided and supported by slots. These were carefully measured with a micrometer and transferred to the design (tolerancing added to allow for thermal expansion). This may work for any powered rear seats on the Mercury or Ford models.
Compatible Cars
Originally published on thingiverse.com by Thomas Banaszak (tbanasz) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
