Files (1)

Gas_Cap_Tether.obj

OBJ

4.2 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

57g

Based on 25% main infill across listed model files

Material cost

$1.37

Filament only at roughly $24/kg PETG / ASA

Print time

1.6h–2.7h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Gas_Cap_Tether.obj	Cover / cap	4.2 MB OBJ	52g $1.26	57g $1.37	125g $3.00	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Mitsubishi Gas Cap Tether

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Flattened one side for easy, clean printing and scaled correctly! Catalog note: Mitsubishi Gas Cap Tether is a 3D-printable car-part listing indexed for classified fitment Mitsubishi. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.