Files (1)

usb_bracket_V2.STL

STL

45.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
usb_bracket_V2.STL	Mount / bracket	45.7 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

MK1 Audi TT USB Bracket

0 downloads41 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The early Audi TT's (1999-2001~ish) had a mobile phone option that included a phone jack in the center console. I made this bracket to install a USB port in place of that original phone jack. This bracket engages the push-tabs on a push-in style USB port and holds them firmly in place. It attaches with the original screws. I'm sure there are only three other people in the entire world who might want this but for them, here it is.