mk3 ford focus boot tailgate badge - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

mk3 ford focus boot tailgate badge

0 downloads39 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

3D printed version of the mk3 ford focus boot/tailgate badge designed in google sketchup, probably not the most easiest tool to do this, any pointers to make the design better let me know printing help: (printed with ender 2) there is 2 mm of extra height at the bottom, this allows you to cut away extra material when fitting to your car i used 1.5mm thick 3M tape to secure to car i used 0.2mm and 0.1mm layer heights, just adjust the number of top layers so it gives a thick enough overall layer the very last layer was printed with 0 walls, this gives a smoother finish in my testing support only needed on bridged areas, the sloped areas were fine in my testing oval ring printed in 0.1 layer height, higher settings made the ring a less smooth shape.