Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| license_plate_mount_front.stl | Mount / bracket | 78.2 KB STL | Slice file | Slice file | Slice file | Print in an enclosure to minimize warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
MK7 Golf R side mount license plate
Shared by
3DPrintedCarPartDescription
Front side license plate mount for MK 7 GOLF R I didn't want to pay for the other 3d printed designs so I whipped this one up. NOTES: - mounted on with 4 zip ties on the black horizontal bars of the lower grill - use foam tape on the that the mount or zip ties will touch the bumper to avoid scratches - use M5 screws, the hole is 4.8 mm so they should self tap into the mount - print with PETG or any other material that is more weather resistant than PLA - print in an enclosure to avoid warping, however slightly warped print will work fine.
Compatible Cars
Originally published on thingiverse.com by Brian Chiu (Brichi) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
