Files (2)

hitch.STL

STL

97.8 KB

rabbit.STL

STL

155.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
hitch.STL	Printable file	97.8 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
rabbit.STL	Printable file	155.2 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

VW Rabbit Hitch Receiver Cover

0 downloads45 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

VW Rabbit hitch cover I made for my Golf. Should fit any 1.25 inch receiver. Parts attach with an M8x35 or a 5/16x1.5" bolt, and swings freely. (Part that goes into the hitch is 8.5mm for this reason).

Compatible Cars

Volkswagen Golf

Published Jun 28, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Craig H (DirtyDieselDub) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.