VW Door Card Repair Parts (Scirocco, Golf, Polo and more) - image

Files (8)

Door_Card_Clip_Insert_Repair.stl

STL

273.0 KB

Door_Card_Lower_Clip-Body.stl

STL

290.1 KB

Outer_Sill_Pin.stl

STL

122.7 KB

Beauty_Cap.stl

STL

40.6 KB

Door_Lock_Bezel.stl

STL

51.7 KB

Clips_scirocco_2_Modif_v4.stl

STL

32.6 KB

Door_Card_Lower_Clip-Pin.stl

STL

29.9 KB

Door_Card_Pin_V3-TPU.stl

STL

78.7 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

8 model files

Recommended kit

50g

Based on 70% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 70%	100% solid	Recommendation
Door_Card_Clip_Insert_Repair.stl	Clip	273.0 KB STL	5g $0.11	9g $0.21	11g $0.27	Use a high infill percentage for added strength
Door_Card_Lower_Clip-Body.stl	Clip	290.1 KB STL	5g $0.12	9g $0.21	11g $0.27	Use a high infill percentage for added strength
Outer_Sill_Pin.stl	Printable file	122.7 KB STL	4g $0.09	7g $0.16	9g $0.21	Use a high infill percentage for added strength
Beauty_Cap.stl	Cover / cap	40.6 KB STL	3g $0.06	5g $0.12	6g $0.15	Use PETG / ASA; check sealing faces and verify in slicer.
Door_Lock_Bezel.stl	Printable file	51.7 KB STL	3g $0.07	5g $0.13	7g $0.16	Use a high infill percentage for added strength
Clips_scirocco_2_Modif_v4.stl	Clip	32.6 KB STL	3g $0.06	5g $0.11	6g $0.15	Use a high infill percentage for added strength
Door_Card_Lower_Clip-Pin.stl	Clip	29.9 KB STL	2g $0.06	5g $0.11	6g $0.14	Use a high infill percentage for added strength
Door_Card_Pin_V3-TPU.stl	Printable file	78.7 KB STL	3g $0.08	6g $0.14	8g $0.18	Use a high infill percentage for added strength

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

VW Door Card Repair Parts (Scirocco, Golf, Polo and more)

2 downloads260 views0 likes

Shared by

Michael Chen

Verified

Description

Repair parts for your VW MK2 panel cards. Repair part so you can glue a replacement pin holder to the inside of the card - PETG, ABS or Polycarbonate Lower Door Card - PETG, ABS or PolyCarbonate Door Sill Clip - Nylon / PA is best. You can try PETG but it may crack Use high in-fill for strength: anything over 70%.