Files (4)

beetlebasket.stl

STL

beetlebasketleg.stl

STL

klipsikoriohut.stl

STL

klipsikori.stl

STL

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

4 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
beetlebasket.stl	Printable file	0 B STL	12g $0.28	13g $0.30	27g $0.66	Ensure a stable and level print bed for optimal results
beetlebasketleg.stl	Printable file	0 B STL	12g $0.28	13g $0.30	27g $0.66	Ensure a stable and level print bed for optimal results
klipsikoriohut.stl	Printable file	0 B STL	12g $0.28	13g $0.30	27g $0.66	Ensure a stable and level print bed for optimal results
klipsikori.stl	Printable file	0 B STL	12g $0.28	13g $0.30	27g $0.66	Ensure a stable and level print bed for optimal results

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

vw beetle type 1 basket

1 downloads577 views0 likes

Shared by

Michael Chen

Verified

Description

Needed stable basket for my old beetle to keep etc phone and bluetooth speaker. Also included clips for phone, thin and thicker versions, you can put them on inside or outside or both. Please add pics if you print this :-D.