Mobius DashCam Screen Mount Mercedes CLC - image

Files (1)

Mobius-Merc_Screen_Mount.stl

STL

91.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Mobius-Merc_Screen_Mount.stl	Mount / bracket	91.3 KB STL	Slice file	Slice file	Slice file	Ensure the print bed is level and clean for optimal adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Mobius DashCam Screen Mount Mercedes CLC

0 downloads55 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Dash cam mount for Mobius camera. This was designed to screw on to the original Mobius clip on sleeve so the camera can be removed if required. It has an angle of 26.5deg to suit my Mercedes CLC coupe and is secured to the windscreen next to the rear view mirror on the black section of the screen using 3m double sided 1.5mm thick adhesive pads.