Model T Compression Tester Adapter M14 to 1/2 NPT - image

Files (1)

CompressionAdapterM14-0500NPT.STL

STL

3.4 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
CompressionAdapterM14-0500NPT.STL	Primary model	3.4 MB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the build plate to prevent shifting during printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

Model T Compression Tester Adapter M14 to 1/2 NPT

0 downloads48 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Ford Model T and other antique cars have 1/2 NPT pipe thread spark plug holes. Most compression testers don't have a suitable adapter. This adapter works with an M14 compression test fitting, and adapts it to 1/2 NPT.