Mustang Pony shifter knob (M12 X 1.75) V2 - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Mustang Pony shifter knob (M12 X 1.75) V2

0 downloads28 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

M12 x 1.75 threads The pic is black abs sanded smooth in steps starting with 320 grit and I worked my way to 1500 grit. I used a threaded piece and I stuck the other end in my drill. Will upload that tool shortly. You could make an easier job of this with slightly better results by sanding with just 320 grit and using an acetone vapor bath. I will likely try that with another knob. Link for tool:https://www.thingiverse.com/thing:3525268