Files (1)
Based on 20% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 20% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| MX5_Cowl_SmallButton_RemovalHole.stl | Primary model | 183.5 KB STL | 15g $0.36 | 15g $0.36 | 35g $0.85 | Align the flat base to the print bed for optimal adhesion |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
MX-5 Miata Windscreen Cowl / Grille Screw Cap
Description
Part is a replacement for those small round screw caps on the windscreen cowl that seem to have a nasty habit of disappearing or getting damaged over the life of a vehicle. Should fit NA and NB models. It shouldn't need as much force to install as the originals, and is equipped with a small notch to allow for easier removal by DIY orangutans. Print instructions: ABS Align flat base to print bed Keep your layers small (it prints quick, crank up the quality) 20% infill or more Any fitment issues or suggestions, fire away!
Compatible Cars
Originally published on thingiverse.com by Ryan Zujic (Combustive) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
