Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Vents

ND Miata MX-5 AC vent cover

0 downloads38 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Mice got into the AC vent on my miata. The stock "cover" does not actually cover anything. This design sandwiches 1/4" steel screen fencing between two 3d printed parts so that the intake hole is covered without having sharp metal touch the paint. I found the 1/4" mesh screen in the lawn and garden department at menards. Cut it so that it wraps down around the inner piece and then force the top piece over it. The cover re-uses the snap tabs from the stock "cover".