Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ABS 20% | PETG / ABS 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Nextbase_112-212_Dashcam_Mount.stl | Mount / bracket | 28.0 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation for minimal supports |
| Volvo_V60_Rear_Nextbase_112_Dashcam_Mount.stl | Mount / bracket | 167.1 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation for minimal supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Nextbase 112 212 Dashcam Mount Volvo v60
Shared by
3DPrintedCarPartDescription
My design of a holder for the Nextbase 112 or 212 dashcam mount. I've put an STL of just the mounting clip which you can remix to fit your application, and also a specific mount fo the right height and angle to mount rear facing on the Volvo v60. All created in tinkercad. I printed in PETG, but ABS would also be suitable. I wouldn't advise PLA as it may soften in the heat of the vehicle.
Compatible Cars
Originally published on thingiverse.com by Nick Godfrey (NickPick451) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
