Nissa Leaf 2011-2018 - Universal Phone Holder - image

Files (2)

Nissan_Leaf_-_Car_Adapter.stl

STL

103.6 KB

Nissan_Leaf_Universal_adapter.stl

STL

47.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
Nissan_Leaf_-_Car_Adapter.stl	Printable file	103.6 KB STL	Slice file	Slice file	Slice file	Use a brim for better adhesion to the print bed
Nissan_Leaf_Universal_adapter.stl	Printable file	47.3 KB STL	Slice file	Slice file	Slice file	Use a brim for better adhesion to the print bed

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Nissa Leaf 2011-2018 - Universal Phone Holder

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The main part in this Thing have been created by "simbaz" and you can find the entire thingy here: https://www.thingiverse.com/thing:2563763 I have only created an adapter from the car clip to a Biltema universal phone holder: https://www.biltema.no/en-no/car---mc/car-interior/mobile-phone-accessories/universal-mobile-phone-mount-2000041910 The brilliant thing about the car clip that simbaz have made is that it does not interfere with the airblower. And you could potentially use two of these simultaneous. Too bad it does not fit newer Leafs. PS: Use Brim and PETG. I have yet to let this be heated in the sun and see how if it still holds it's shape.:).