Files (1)

Nissan_USB-1.stl

STL

659.7 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg ABS / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	ABS / ASA 20%	ABS / ASA 25%	100% solid	Recommendation
Nissan_USB-1.stl	Primary model	659.7 KB STL	46g $1.10	50g $1.20	110g $2.63	Print with flange down to avoid using supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Nissan 240SX USB Adapter

0 downloads186 views0 likes

Shared by

Michael Chen

Verified

Description

This adapter will fit an Anker 48W 4-Port USB Car Charger in a 1990 Nissan 240SX in the center console next to the cigarette lighter. You can splice into the cigarette wires to power the Anker charger. I recommend printing out of ABS due to the heat on a sunny day. There is a split in the design that will print joined, this means you must install the charger with the wires through the adapter. If you slice the split with a knife (please be careful) then you can snap the adapter around the charger after wiring up and the split shouldn't be very noticeable. Print with flange down to avoid using supports.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

Nissan (all models)

Published Feb 18, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

3.1K

License: CC BY

View & download STL files