Nissan CA/RB Timing Belt Cover Washer/Grommet - image

Files (1)

Nissan_RB_Cam_Belt_Cover_Washers.stl

STL

128.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	TPU (like NinjaTek Cheetah) 20%	TPU (like NinjaTek Cheetah) 90%	100% solid	Recommendation
Nissan_RB_Cam_Belt_Cover_Washers.stl	Cover / cap	128.5 KB STL	Slice file	Slice file	Slice file	Use TPU (like NinjaTek Cheetah); check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Nissan CA/RB Timing Belt Cover Washer/Grommet

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a replacement rubber washer/grommet for the timing belt cover on a Nissan RB25 engine. From looking online it seems that it will also work for the CA18, RB20, RB26, VG30 engines too. I found that the OEM rubber grommet/washers had become hard and some had broken when removing them. Remove the old metal washer from the original parts, clean up and insert into the printed items. I printed this in TPU (NinjaTek Cheetah).