Files (3)

Nissan_Emblem_Blank.stl

STL

482.9 KB

Nissan_Emblem_CHOPPED.stl

STL

558.2 KB

Nissan_Emblem_NISSAN.stl

STL

539.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Nissan_Emblem_Blank.stl	Printable file	482.9 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to avoid warping
Nissan_Emblem_CHOPPED.stl	Printable file	558.2 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to avoid warping
Nissan_Emblem_NISSAN.stl	Printable file	539.9 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Nissan Emblem (with clips)

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Nissan Front Emblem Model 62889 1JA0A. I looked online for similar files and only found cheap looking ones for a pricey amount, so I thought I'd model and print my own free one for the community! I've included the original model as well as the chopped up model for easier printing, as well as a blank emblem if anyone wants to remix this project. Happy making! P.S. As of now I have not tested with a car and will update when I do! UPDATE: When I printed and test fitted the angle of the clips was off. I had it set to 13 degrees and it should be around 5. To fix this I'd recommend using a hairdryer or heat gun to melt and mold the clips to a more vertical angle.