Files (1)

GTR_Center_Cap_6.0_tested.stl

STL

318.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ASA / ABS 20%	ASA / ABS 25%	100% solid	Recommendation
GTR_Center_Cap_6.0_tested.stl	Cover / cap	318.9 KB STL	Slice file	Slice file	Slice file	Use ASA / ABS; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

R35 GT-R Center Cap

0 downloads68 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Working R35 Center Cap. Recommended you print in ABS. Prototypes done in PLA, final structural prototype fit in a 2014 OEM wheel with a 54mm center cap. Pictured prototype had the wrong logo, redesigned with the R35 generation logo. Use at your own risk. (PLA doesn't have a great temperature range).