Files (2)

nissan_valve_covers_scaled98-7pc.stl

STL

101.0 KB

nissan_valve_covers_scaled98-7pc_180deg.stl

STL

101.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 35%	100% solid	Recommendation
nissan_valve_covers_scaled98-7pc.stl	Cover / cap	101.0 KB STL	Slice file	Slice file	Slice file	Use PETG / ABS; check sealing faces and supports unlikely.
nissan_valve_covers_scaled98-7pc_180deg.stl	Cover / cap	101.0 KB STL	Slice file	Slice file	Slice file	Use PETG / ABS; check sealing faces and supports unlikely.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Nissan Logo Tyre/Tire Valve Cap

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Valve cap for Nissan vehicle. Schraeder valve. Not internally threaded but slightly tight so will self tap on first attachment to the valve. Make it out of PETG or ABS, as tyres and wheels get hot, PLA might melt or soften. Print face down, to achieve smooth or textured logo and avoid support. Elephants foot compensation helps too. Print one check it fits okay, if its too big or small scale it up or down by 1%, then reprint 5, so you have spare. Remixed from: https://www.thingiverse.com/thing:733477 https://www.thingiverse.com/thing:3852075 Thank you.