Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Micra_K12_bushing_for_wiper_trapeze.stl | Primary model | 223.3 KB STL | Slice file | Slice file | Slice file | Ensure a secure fit by adjusting the model's holes for metal pin fixation if necessary |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Nissan Micra K12 bushing for wiper trapeze
Shared by
3DPrintedCarPartDescription
One day my wipers stop functioning properly, after disassembly I figured out that one of traction levers fell from its bushing due to wearing out. So I decided to make a quick fix - my own bushing because I don't want to order and wait new trapeze and there is no spare bushings on market. In the model I prepared holes of 1mm for fixing parts and cap together by metal pin, but it's not necessary - everything is tight enough. Here is model for edit: https://www.tinkercad.com/things/jZBJlr4XuZp
Compatible Cars
Originally published on thingiverse.com by Kull Damned (Kull_Damned) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
