Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Nissan Note glovebox latch

0 downloads49 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

These are the spokes of the glovebox latch / lock for Nissan Note 2010. The parts that will snap from the lock if weight is put on the glovebox. 1) Unscrew the lock from the glovebox. 2) Use a screwdriver or similar push down the plastic pieces that keep the lock together and disassemble the lock mechanism until the spokes are free. 3) Remove the snapped spokes. 4) Replace with the printed ones. Note that there is a groove in the spoke hole and thus the two spokes are not interchangeable. 5) Reassemble the lock and screw it in place.6) Use the glove box.:).