Nissan Power Mirror Switch Panel Blank - image

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

0 model files

Recommended kit

—

Based on 25% main infill across listed model files

Material cost

$0.00

Filament only at roughly $24/kg PETG / ASA

Print time

—–—

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Nissan Power Mirror Switch Panel Blank

0 downloads33 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a replacement panel blank for the Nissan D21 (aka Navarre, Patrol, also fits Pathfinder) 1988 - 1993 for the power mirror switch panel. This is the big panel on the left-hand side of the steering column just left of the dimmer. Since I don't have power mirrors, I decided to relieve the Nissan logo into the panel. I printed this initially in PLA, and it has survived quite well for its first summer. Long term, you should print in ABS.