Nissan Silvia (S15) SpecR MAF to 3" Filter Adapter - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Nissan Silvia (S15) SpecR MAF to 3" Filter Adapter

0 downloads41 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a MAF adapter to get rid of your bulky Nissan Silvia (S15) air box. It is a simple MAF flange to 3" inlet. In my case I am using an older HKS Mushroom filter and have been running it for about 6 months from the date of this publishing. I printed mine in PETG and that withstands the temps of the engine bay quite well. If I were to do it again I may print in ABS instead so I can smooth it to make it look a bit more specific to the engine bay. This does not include any mounting tabs to keep it secured in the engine bay. My mushroom filter diameter is quite large and it wedges nicely into the available area. A smaller paper or cloth filter may require additional mounting inside the area.