Nissan wireless Key Holder on Seat Belt Anchor - image

Files (2)

gtrKey_setBelt.stl

STL

266.8 KB

V2.stl

STL

1.1 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

32g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.77

Filament only at roughly $24/kg PETG / ASA

Print time

55m–1.5h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
gtrKey_setBelt.stl	Printable file	266.8 KB STL	17g $0.40	18g $0.44	40g $0.96	Ensure a strong adhesion to the build plate to prevent warping
V2.stl	Printable file	1.1 MB STL	30g $0.71	32g $0.77	71g $1.70	Ensure a strong adhesion to the build plate to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Nissan wireless Key Holder on Seat Belt Anchor

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I mix two great things in one! Catalog note: Nissan wireless Key Holder on Seat Belt Anchor is a 3D-printable car-part listing indexed for classified fitment Nissan. Provenance: source thingiverse.com, license CC BY-SA. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.