Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 40% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| N55_funnel.STL | Primary model | 1.3 MB STL | Slice file | Slice file | Slice file | Ensure a strong adhesion to the print bed to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
oil fill locking funnel for BMW N55
Shared by
3DPrintedCarPartDescription
Locking oil funnel with vent line for BMW N55 engines. I felt like experimenting with swept extrusions on this one so it's rectangular, not round. May also work on other engine with a 90 degree locking cap that sits at an odd angle like this one. My print looks a little porous, as it's absorbed some oil, but it hasn't leaked through. This'll be the last, and only time I use clear filament for something like this.
Compatible Cars
Originally published on thingiverse.com by Nick Boers (nickboers) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
