Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Opel Agila key

0 downloads40 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

So my mum broke her Opel Agila key. looking inside I could not refrain from designing her a new (and better!) cover for her key! Here is the result of my work if you need it! Just dismount the old car key, take the three components inside (the key, the RFID for immobilizer and the round radio controller), place them in your just printed cover and close it with two little screws. Unfortunately I can't tell you what screw you need because I've taken two that I had at office but they are fairly common. You need the same thread as the original key as the inside hole of the key's hole is threaded.