Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Car_phone_holder_v6.stl | Mount / bracket | 277.8 KB STL | Slice file | Slice file | Slice file | Verify support generation and orientation in your slicer for optimal results |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Opel Astra Phone Holder
Shared by
3DPrintedCarPartDescription
I've designed this holder to be more suited for a smartphone in a case (etui) which makes it quite thick. It is easy to place and remove. If you need to make this holder more suitable for your phone, you can simply scale it a little bit (in a certain axis), or attach (e.g. by glue) some sticky material, to avoid phone falling out while driving. My phone fits perfectly, which means that it's easy to put in, but not prone to falling out. Printed in PLA+ which is a bit more resistant to temperature, but I will test if it melts if temps go higher:) Also I printed it in 0.3 mm - it was supposed to be just technical draft, but it's ok like that. Requires supports!
Compatible Cars
Originally published on thingiverse.com by Jarosław Grządziel (jgrzadziel) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
