OPEL Insignia - Clenning watter cup for wipers - image

Files (4)

Opel_-_Cup_for_clenning_watter_can.stl

STL

48.1 KB

Opel_-_Cup_for_clenning_watter_can_1.stl

STL

178.6 KB

Opel_-_Cup_for_clenning_watter_can_5.stl

STL

222.4 KB

Opel_-_Cup_for_clenning_watter_can_7.stl

STL

221.3 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

4 model files

Typical selected file

17g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.41

Filament only at roughly $24/kg PETG / ASA

Print time

29m–49m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Opel_-_Cup_for_clenning_watter_can.stl	Printable file	48.1 KB STL	10g $0.24	11g $0.26	24g $0.57	Ensure proper orientation for optimal hinge functionality
Opel_-_Cup_for_clenning_watter_can_1.stl	Printable file	178.6 KB STL	15g $0.35	16g $0.38	35g $0.84	Ensure proper orientation for optimal hinge functionality
Opel_-_Cup_for_clenning_watter_can_5.stl	Printable file	222.4 KB STL	16g $0.38	17g $0.41	38g $0.90	Ensure proper orientation for optimal hinge functionality
Opel_-_Cup_for_clenning_watter_can_7.stl	Printable file	221.3 KB STL	16g $0.38	17g $0.41	38g $0.90	Ensure proper orientation for optimal hinge functionality

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

OPEL Insignia - Clenning watter cup for wipers

1 downloads44 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

... the wipers can cup / holder gets often broken apart and cup lost.. here a solution with a hinge. I have added a new file as I have realized that previously I have uploaded a beta one... Sorry for inconveniences.